REPLACE CRANKSHAFT PULLEY

INSTALLATION (cont) - TM-5-6115-634-14P_183

TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual
Page Navigation
160

TM5-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 MAINTENANCE OF THE CRANKSHAFT PULLEY 5-24. REPLACE CRANKSHAFT PULLEY This task covers: a. Removal b. Installation INITIAL SETUP Tools General Mechanic’s 5180-00-177-7033 #1 Common Tool Kit TBD Materials/Parts Pulley Crankshaft 97403-13228E1893 Equipment Conditions: Reference Tool Kit Para. 4-35 Remove Engine V-belt. REMOVAL 1. REMOVE CRANKSHAFT PULLEY. a. Remove nut (1), lockwasher (2), pulley washer (3) and pin (4). b. Remove pulley (5) from pulley shaft. INSTALLATION 1. INSTALL CRANKSHAFT PULLEY. a. Install new pulley (5) onto pulley shaft. b. Install pin (4), pulley washer (3), lockwasher (2) and nut (1) onto pulley shaft. c. Tighten the nut (1) to 125 ft- lb (172.5 n-m). NOTE FOLLOW ON MAINTENANCE: Install Engine V-belt (Para. 4-35). 5-42

Privacy Statement
Press Release
Contact