REPLACE FENDER, ROADSIDE AND CURBSIDE

INSTALLATION (cont) - TM-5-6115-634-14P_125

TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual
Page Navigation
102

TM-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 MAINTENANCE OF FENDER, ROADSIDE, CURBSIDE 4-43. REPLACE FENDER, ROADSIDE AND CURBSIDE This task covers: a. Removal b. Installation INITIAL SETUP Tools General Mechanic’s Tool Kit 5180-00-177-7033 Materials/Parts Fender, Roadside 97403-13214E1264 Fender, Curbside 97403-13214E1263 Equipment Conditions: Reference Para. 4-9 General Instructions. General Safety Instructions Due to the bulk and weight of the fenders, a minimum of two persons are required to move them. Failure to do so could result in serious injury. When removing mounting hardware brace or hold the step so it will not drop. REMOVAL 1. REMOVE FENDER, ROADSIDE. a. Remove five 1-1/4 inch screws (1), 10 flat washers (2) and five self-locking nuts (3). b. Remove seven 1-inch screws (4), 14 flat washers (5) and seven self-locking nuts (6). c. Remove five 1-inch screws (7), flat washers (8) and five self-locking nuts (9) and remove roadside fender (10). 2. REMOVE FENDER, CURBSIDE. a. Perform steps 1a through 1c, above, to remove curbside fender (11). 4-66

Privacy Statement
Press Release
Contact