TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF REAR STEP, ROADSIDE, CURBSIDE
4-44. REPLACE REAR STEP, ROADSIDE AND CURBSIDE
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
5180-00-177-7033
Materials/Parts
Step Rear, Roadside
97403-13214E1876
Step Rear, Curbside
97403-13214E1259
Equipment Conditions:
Reference
Para. 4-9 General Instructions.
General Safety Instructions
Due to the bulk and weight of the
rear steps, a minimum of two persons
are required to move them.
Failure
to do so could result in serious
injury.
When removing mounting hardware,
brace or hold the step so it will
not drop.
REMOVAL
1. REMOVE REAR STEP, ROADSIDE.
a. Remove ten 1-inch screws (1), 20
flat washers (2) and 10 self-
locking nuts (3).
b. Remove five 1-inch screws (4),
10 flat washers (5) and self-
locking nuts (6) and remove
roadside rear step (7).
2. REMOVE REAR STEP, CURBSIDE.
Perform steps 1a and 1b
to remove curbside rear
step (8).
4-68
