TM 5-6115-593-12
TO 35C2-3-463-1
STEP 1.
PLACE AC PWR CKT BKR IN OPEN POSITION APPROXIMATELY 2 OR 3 SECONDS; THE AC PWR CKT
BKR CLOSED LIGHT SHOULD GO OUT.
WARNING
Shutters will snap shut rapidly with considerable force when generator set is stopped. Ensure all
personnel are clear of shutters before placing MASTER switch to STOP. Serious injury could
result.
STEP 2.
PLACE MASTER SWITCH IN STOP POSITION AFTER ALLOWING ENGINE TO COOL BY OPERATING AT
NO LOAD FOR APPROXIMATELY 5 MINUTES.
STEP 3.
AFTER ENGINE STOPS, REMOVE DC CONTROL POWER BY SETTING 24V DC CONTROL CIRCUIT
BREAKER TO OFF POSITION.
Figure 2-11. Stopping Instructions with Housing Kit Installed.
2-26
