Figure 2-9. Preparation for Starting with Housing Kit Installed (Sheet 3 of 3)

Figure 2-9. Preparation for Starting with Housing Kit Installed (Sheet 2 of 3)

Figure 2-10. Starting Instructions when Ambient Temperature is from 40F to -25F (4.4C to -32C) and Housing Kit is Installed (Sheet 1 of 3)

TM-5-6115-593-12 Power Plant Utility (MUST) Gas Turbine Engine Driven (AMERTECH Corp Model APP-1) Manual
Page Navigation
53

TM 5-6115-593-12 TO 35C2-3-463-1 WARNING DO NOT OPERATE THE GENERATOR SET UNLESS THE GROUND TERMINAL STUD HAS BEEN CONNECTED TO A SUITABLE GROUND. ELECTRICAL FAULTS IN THE GENERATOR SET, LOAD LINES OR LOAD EQUIPMENT, CAN CAUSE INJURY OR LOAD LINES OR LOAD EQUIPMENT, CAN CAUSE INJURY OR ELECTROCUTION WITH AN UNGROUNDED SYSTEM. WARNING MAKE SURE THAT NO TOOLS, PARTS OR LOOSE ITEMS ARE ON ANY PART OF THE ENGINE SINCE THEY MIGHT CAUSE BODILY HARM TO PERSONNEL WHEN THE ENGINE IS STARTED. CAUTION IF ENGINE DOES DOT START IN 45 SECONDS, OVERCRANK PROTECTION WILL TERMINATE THE CRANKING CYCLE. RESET AND ALLOW 1-MINUTE REST BEFORE STARTING ANOTHER CRANK CYCLE. Figure 2-9. Preparation for Starting with Housing Kit Installed (Sheet 3 of 3) 2-22

Privacy Statement
Press Release
Contact