Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
Figure 5-10. Rear Closure Assembly, Removal and Installation
Figure 5-11. Rear Flap Assembly, Removal and Installation
TM-5-6115-585-12 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 KW 1 Phase 2 Wire 1 Phase-3 Wire 3 Phase-4 Wire 120 120/240 and 120/208 Volts Manual
Page Navigation
140
141
142
143
144
145
146
147
148
149
150
TM 5-6115-585-12
NAVFAC P-8-623-12
TO 35C2-3-455-1
TM-05684C/05685B-12
5-14.
REAR
FLAP
ASSEMBLY
.
a.
Removal.
See figure 5-11.
Remove rear flap assembly
from skid as follows:
(1) Remove three screws (1) and locknuts (2), and six
washers (3 and 4) securing rear flap assembly (5) to skid (6).
(2)
Remove rear flap assembly (5).
b.
Installation.
See figure 5-11.
Install rear flap
assembly as follows:
(1) Position rear flap assembly (5) on skid (6) and
install three screws (1) and locknuts (2), and six washers (3
and 4).
(2)
Torque
screws (1) to 16 ±2 ft-lbs dry.
Change 8
5-23
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business