TM 5-6115-585-12
NAVFAC P-8-623-12
TO 35C2-3-455-1
TM-05684C/05685B–12
(2)
Install four screws (1) and washers (2) securing
front panel assembly (3) to top panel assembly (4).
(3)
Torque screws (1 and 5) to 18 ±2 in.-lbs dry.
5-12.
SIDE CLOSURE ASSEMBLY.
Refer to paragraph 5-5 for removal and installation procedures.
5-13. REAR CLOSURE ASSEMBLY.
a.
Removal.
See figure 5-10.
Remove rear closure
assembly from control box support, side closure assembly, right
panel and top panel assemblies as follows:
(1) Remove top panel assembly (1) as described in
paragraph 5-4.
(2)
Remove two screws (2) and locknuts (3), and four
washers (4 and 5) securing rear closure assembly (6) to right
panel assembly (7).
(3)
Remove two screws (8) and locknuts (9), and four
washers (10 and 11) securing side closure assembly (12) to rear
closure assembly (6).
(4) Remove four screws (13) and locknuts (14), and
eight washers (15 and 16) securing rear closure assembly (6) to
mounting brackets (17) and remove rear closure assembly (6).
b.
Installation.
See figure 5-10.
Install rear closure
assembly to control box support, side closure assembly, right
panel and top panel assemblies as follows:
(1)
Install four screws (13) and locknuts (14), and
eight washers (15 and 16) securing rear closure assembly (6) to
mounting brackets (17).
(2)
Install two screws (8) and locknuts (9), and four
washers (10 and 11) securing side closure assembly (12) to rear
closure assembly (6).
(3)
Install two screws (2) and locknuts (3), and four
washers (4 and 5) securing rear closure assembly (6) to right
panel assembly (7).
(4)
Torque screws (2, 13, and 8) to 16 ±2 ft-lbs dry.
(5)
Install top panel assembly (1) as described in
paragraph 5-4.
Change 8
5-21
