TM 5-6115-585-12
NAVFAC P-8-623-12
TO 35C2-3-455-1
TM-05682C/05685B-12
(2) Torque screws (8) to 26 ±2 ft-lbs dry.
(3)
Replace left panel assembly (6) with side closure
assembly (5) as described in paragraph 5-5.
(4)
Replace top panel assembly (5) as described in
paragraph 5-4.
(5) Replace four screws (1) and washers (2) securing
access plate (3) to AC output control box (4).
5-10.
RIGHT SUPPORT ASSEMBLY.
a.
Removal.
See Figure 5-8.
Remove right support
assembly from skid and right panel assembly as follows:
(1)
Remove right panel assembly (1) as described in
paragraph 5-6.
(2) Loosen six screws (2) securing right support
assembly (3) to skid (4) and slide out right support assembly (3)
from under skid (4).
b.
Installation.
See figure 5-8.
Install right support
assembly as follows:
(1) With six screws (2) loosened, slide right support
assembly (3) between skid (4) and bevel washers (5).
(2)
Torque screws (2) to 26 ±2 ft-lbs dry.
(3)
Replace right side panel (1) as described in
paragraph 5-6.
5-11.
FRONT PANEL ASSEMBLY.
a.
Removal.
See figure 5-9.
Remove front panel assembly
from right, left, and top panel assemblies as follows:
(1) Remove four screws (1) and washers (2) securing
the front panel assembly (3) to top panel assembly (4).
(2)
Remove six screws (5) and washers (6) securing
front panel (3) to left panel assembly (7) and right panel
assembly (8).
(3)
Remove front panel assembly (3).
b.
Installation.
See figure 5-9.
Install front panel
assembly to right, left and top panel assemblies as follows:
(1)
Position front panel assembly (3) to right and
left panel assemblies (8 and 7) and secure with six screws (5)
and washers (6).
5-18
Change 8
