Figure 4-40. Breather Assembly

Figure 4-41. Checking and Adjusting Rocker Arm to Valve Clearance

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
110

TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12 Figure 4-40. Breather Assembly (2) Place screen (7) in valve (6) and install re- 4-46. VALVE ROCKER ARMS. tainer (8). a. Inspect (see figure 4-41). Inspect rocker arms (3) Assemble valve (6) on breather tube (12) with for physical damage or excessive wear. packing (9) between them. (4) Install insulators (5) on breather assembly b. Adjust. Check and adjust the rocker arm to and install clamp (4) over insulators (5). proper valve clearance every 500 operating hours. Correct valve clearance is .010 inch for intake valve (5) Tighten screw (3). and .007 inch for exhaust valve. (6) Install breather and insulator assembly on NOTE engine (13). Readjust rocker arm to valve clearance after (7) Connect tube (2) and clamp (1) to breather the first 50 hours of operation on a new or valve (6). rebuilt engine. 4-51

Privacy Statement
Press Release
Contact