T
O
35C2-3-442-2
P-8-627-34
TM-07464A-35
T M 5-6115-457-34
Figure 9-3.
Fuel tank assembly, exploded view
Legend to figure 9-3:
1. Adapter
9.
Gasket
7.
Screw (5)
2, Adapter
7A.
Preformed packing
10.
Cap
3 . Screw (14)
7B.
Lug
11.
Hook
4. Plate
7C.
Wire
Needle valve
12.
5 . Gasket
13.
Coupling
7D.
Lug
6. Nut (5)
14.
Nipple
8.
Fuel level transmitter
15.
Fuel tank
b . Using a multimeter, perform resis-
from bottom of fuel level transmitter
tance test on fuel level transmitter. Resis -
flange. At empty (down), the float shall be
tance shall be 0.00 to 0.50 ohms at empty
7.50 to 7.62 inches from bottom of `fuel
(down) position, and 29.50 to 31.50 ohms at
level transmitter flange.
full (up) position.
d. Check fuel tank for leaks as follows:
c. Connect transmitter float to fuel
level transmitter and check float movement.
1. Plug all fuel tank openings except
At full (up), float shall be 0.44 to 0.50 inch
one. Connect a suitable low pressure
9-7
Change 8
