TM 5-6115-400-35
(5) Remove nozzle holder clamps. and fuel
injection nozzles. Remove. rocker arms
and shaft (para 43).
'Remove valve
bridges from the bridge guide pins.
Withdraw push rods from the cylinder
head.
(6) Disconnect upper ends of fuel injection
lines from fuel line connectors in the
rocker arm housing. Remove capscrews,
plain washers, and lockwashers securing
valve rocker housing to cylinder head and
remove the valve rocker housing.
Remove breather coupling.
(7) Remove cylinder head capscrews and
washers. With a sling similar to the one
shown in figure 39, remove the cylinder
head. Remove cylinder head gaskets.
c. Cleaning and Inspection.
(1) Clean all parts with an approved solvent
and dry thoroughly.
Figure 39. Removing cylinder head.
Figure 38. Cylinder head assembly details.
76
