TM 9-6115-668-13
Table 24 Operator Preventive Maintenance Checks and Services-continued.
Item
No.
GENERATOR COMPART-
MENT
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
2-28
Interval
Wing
During
During
During
During
During
During
During
During
During
During
During
Location
item to Check/Service
READY TO START IF HEAT-
ING IS ON lamp
CONTROL CABINET AS-
SEMBLY plate
Receptacles
Exhaust
Synchronous generator
Output plate
Exciter hood
Fuel tank
Fuel tank assembly plate
Electrical fuel pump
Electrical fuel pump and tank
hose
Electrical fuel pump and valve
hose
Procedure
Check that at READY TO START
IF HEATING IS ON lamp on con-
trol cabinet assembly lights up af-
ter approximately 13 minutes.
Check that control cabinet as-
sembly plate is firmly attached
and readable.
Inspect receptacles for loose-
ness or damage. Check that des-
ignation plates are firmly at-
tached and readable.
Check that exhaust is soot free
after approximately 5 minute
warmup.
Check synchronous generator
for loose or damaged parts.
Check that output plate is firmly
atached and readable.
Inspect exciter hood for dirt build-
up.
Inspect fuel tank for leaks, loose
or damaged parts.
Check that fuel tank assembly
plate is firmly attached and read-
able.
Check that electrical fuel pump is
firmly attached, and that cable is
firmly connected to electrical fuel
pump.
Inspect fuel hose connections to
electrical fuel pump and fuel
tank.
Inspect fuel hose and connec-
tions to electrical fuel pump and
valve.
Not Fully Mission
Capable I:
READY TO START IF.
HEATING IS ON lamp
does not light.
Receptacles
are
loose or damaged.
Exhaust is not soot
free.
Parts are loose or
damaged.
Exciter hood is dirty.
Any fuel leaks, loose
or damaged parts.
Electrical fuel pump is
loose, or control cable
is loose or damaged.
Any fuel leak.
Fuel hose is loose or
damaged. Any fuel
leak.
Fuel hose is loose or
damaged. Any fuel
leak.
