Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued

Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued - TM-9-6115-662-13P_61

Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued - TM-9-6115-662-13P_63

TM-9-6115-662-13P Power Unit Diesel Engine Driven 1 Ton Trailer Mounted 5 Kw 60 Hz PU-797 Manual
Page Navigation
33

TM 9-6115-662-13&P Item No. 37 38 39 40 41 42 Table 2-2. Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 (continued) Location Not Fully Mission Interval Item to Check/Service Procedure Capable if: WARNING Exercise extreme caution when performing “DURING” checks inside engine compartment. Avoid contact with moving or hot engine parts. Failure to observe this warning can result in severe personal injury or death. During During During During During GENERATOR SET ENGINE ASSEMBLY Check for loose, damaged or missing parts. FUEL SYSTEM Inspect for leaks. LUBRICATION SYSTEM a. Inspect for leaks. b. Check oil level on dipstick, both sides. COOLING FAN Listen for unusual noise in fan area. GROUND ROD CABLE AND Inspect ground rod and cable for CONNECTIONS loose connections, breaks, damage, and corrosion. WARNING Any fuel leaks. Class III leaks. Oil level below ADD level. Cable is missing or damaged. During High voltage is produced when this generator set is operating. Improper operation could result in injury or death. CONTROLS AND Observe the following indicators INDICATORS and ensure they are functioning. Coolant temp, 170-200°F (77- 93° c) Oil pressure, 25-60psi (172- 414kPA) 2-25

Privacy Statement
Press Release
Contact