5-13 21/2 TON TRAILER FUEL DRAIN ASSEMBLY MAINTENANCE

Figure 5-16. Fuel Drain Assembly Replacement.

TM-9-6115-662-13P Power Unit Diesel Engine Driven 1 Ton Trailer Mounted 5 Kw 60 Hz PU-797 Manual
Page Navigation
147

TM 9-6115-662-13&P 5-13 21/2 TON TRAILER FUEL DRAIN ASSEMBLY MAINTENANCE. This task covers: a. Removal c. Installation b. Repair INITIAL SETUP Tools Equipment Conditions Tool Kit, General Mechanic’s Reference (item 1, appendix B) Generator Set removed, paragraph 5-6. Trailer support devices are lowered, paragraph 2-3.2.1. REMOVAL 1. 2. 3. 4. 5. 6. Close drain cock valve (9, figure 5-16) and remove cap (2) from the fuel drain assembly. Place container beneath fuel drain assembly. Disconnect hose fittings (3) from drain cock valve (4). Remove hose assembly (1). Remove drain cock valve (4), retaining nut (6), and flat washer (5) from the tube nipple (7). Remove tube nipple (7). REPAIR Refer to appendix G and replace fuel drain assembly. INSTALLATION 1. Position tube nipple (7) on the equipment. 2. Install the flat washer (5), retaining nut (6), and drain cock valve (4) then tighten. 3. Install drain cock valve (4) on tube nipple (7). 4. Install hose assembly (1) and tighten hose fittings (8). 5. Install hose fitting (3) and tube cap (2) on drain cock valve (4). 6. Close drain cock valve (4) and open valve (9). 5-32

Privacy Statement
Press Release
Contact