AN/MJQ-35 accessory box is attached at three points. AN/MJQ-35A, AN/MJQ-36, PU-
797, and PU-797A accessory box is attached at four points. The two forward mounting
screws on AN/MJQ-35A and PU-797A accessory boxes are longer then the rear two.
Remove self-locking nuts (5), flat washers (3), machine bolts (2), and accessory box (1).
Unit level maintenance of the accessory box consists of replacing clamping catches and
hasp. Other repairs, such as straightening or welding, are performed at next higher level
Figure 4-20. Repair Accessory Box.
REPLACE CLAMPING CATCH.
Drill out rivets (5) that secure defective clamping catch and strike (6) to accessory box (4) and remove clamping
catch and strike (6).
Install new clamping catch and strike (6) on accessory box (4) and secure with rivets (5).
Change 2 4-41