ARMY TM 9-6115-60412 NAVY NAVFAC P-8-633-12 Table 1-1.  System Capacities and Detailed Data on Components (Continued) 3. AC ELECTRICAL POWER GENERATION AND CONTROL SYSTEM (CONTINUED) 100 Amperes Distribution Panel DP1 Drawing Number: 80-7401 Rating: 120/240 V ac, 100 amperes, single phase, three wire, 50/60 Hz Specification: WP115A, Type I, Class 2 Copper Lugs: No 12 to 1/0 AWG Circuit Breakers: Per W-C-375 common trip Enclosure: NEMA 1 Material: Box no 16 GA (0.060) steel, front panel no 14 GA (0.075) steel, recessed hinges, flush lock, milled key Finish: ANSI No.  61 light gray Breaker Interrupting Capacity: 1000 amperes minimum symmetrical Bus Bar Supports: Glass filled polyester insulators Frame Circuit Directory: Located on rear of front panel and protected by clear plastic Operating Temperature: -25 to +125°F (-31 to 51°C) Storage Temperature: -5 to +1 55°F (-53 to 68°C) Humidity Conditions: To 100% Manufacturer: ITE Electrical Products Part Number: 7205-61581-M1 FSCM: 88220 200 Amperes Distribution Panel DP2 Drawing Number: 80-7402 Rating: 120/240 V ac, 200 amperes, single phase, three wire, 50/60 Hz Specification: WP115A, Type I, Class 2 Lugs: Copper, to accommodate one #6 to 350 mcm wire Circuit Breakers: Per W-C-375 common trip Enclosure: NEMA 1 Material: Box No.  16 GA (0.060) steel, front panel no 14 GA (0.075) steel, recessed hinges, flush lock, milled key Finish: ANSI no.  61 light gray Breaker Interrupting Capacity: 1000 amperes symmetrical Bus Bar Supports: Glass filled polyester insulators Frame Circuit Directory: Located on rear of front panel and protected by clear plastic Operating Temperature: -25 to +125°F (-31 to 51°C) Storage Temperature: -65 to +1 55°F (-53 to 68  C) Humidity Conditions: To 100% Manufacturer: ITE Electrical Products Part Number: 7205-61581-M1 FSCM: 88220 1-23