ARMY TM 9-6115-604-12 NAVY NAVFAC P-633-12 Table 1-1. System Capacities and Detailed Data on Components (Continued) 3. AC ELECTRICAL POWER GENERATION AND CONTROL SYSTEM (CONTINUED) Power Cable Drawing Number: 80-7901 Material: Type W/3 conductor, round/600/2000 V Conductor Size: No 4 Strand 259 Nominal Insulation Thickness: 0.060 Inch (1.524 mm) Nominal Jacket Thickness: 0 141 Inch (3.581 mm) Nominal Outer Diameter: 1 17 inch (29 72 mm) Ampacity: 104 Operating Temperature: -25 to +125°F (-31 to 51°C) Storage Temperature: -65 to +155°F (-53 to 68°C) Humidity Conditions: To 100% Manufacturer: E. J. Stephens Inc. Part Number: PC13030, Type W/3 FSCM: None 4. FUEL SYSTEM Transfer Pump Assembly B102 Drawing Number: 80-7527 Design Rating: 9.5 gpm (4.28 Umin) at 1140 rpm Materials: Gray iron housing and steel gears Bearings: Replaceable sleeve type Seal: Mechanical shaft type Lubrication: Self-lubricating (using fluid being pumped) Rotation: Clockwise facing pump shaft Suction Lift: 15 Inch Hg minimum Drive: Direct connected Key: 0.187 square by 0.75 long steel furnished loose Operating Temperature: -25 to +125°F (-31 to 51 C) Storage Temperature: -65 to +155°F (-53 to 68°C) Humidity Conditions: To 100% Manufacturer: Brown & Sharpe Company Part Number: 713-30-7 FSCM: 09058 Electric Motor Drawing Number: 80-7684 Rating: NEMA frame 56, fully enclosed cap. start; fan-cooled - counterclockwise rotation (facing shaft) 115/208 V ac, single phase, 50/60 Hz; 8/4-4 amperes full load, 0.5 horsepower, 1140 rpm Operating Temperature: -25 to +125°F (-31 to 51°C) Storage Temperature: -65 to +155°F (-53 to 68°C) Humidity Conditions: To 100% Manufacturer: Baldor Electric Company Part Number: L3505 FSCM: 05472 1-26