ARMY TM 9-6115-464-12
AIR FORCE TO 35C2-3-445-1
NAVY NAVFAC P-8-624-12
Section XVIII. TOOL STOWAGE BOX
4-89
GENERAL. A tool stowage box is provided on the left side of the generator set (Figure 1 -5). The generator
access door must be opened to gain access to the tool box. The dimensions of the tool box are 15.25" x 10.43" x
6.12". The tool box has a hinged cover that is held in the closed position by a single draw-pull fastener.
a.
Removal. Remove the hex nuts (1, Figure 4-52), lockwashers (2) and capscrews (3) to remove the tool
box.
b. Inspection and Cleaning.
(1) Inspect the tool box for damaged hinge or fastener, dents, corrosion, and deterioration of finish.
(2) Clean the tool box with an approved solvent and dry thoroughly.
c.
Installation. Install the tool box with capscrews (3, Figure 4-52), lockwashers (2), and hex nuts (1).
1. Nut
2. Lockwasher
3. Capscrew
Figure 4-52. Tool Stowage Box
4-121
