ARMY TM 9-6115-464-12AIR FORCE TO 35C2-3-445-1NAVY NAVFAC P-8-624-124-76 PARALLELINGRECEPTACLES.a.Removal.(1) Remove screws and lockwashers (Figure 4-49).(2) Unscrew protective caps and shorting plug from paralleIing receptacles.(3) Remove screws and pull paralleling receptacles away from generator set.(4) Tag and unsolder electrical leads to receptacles.b. Cleaning and lnspection.(1)(2)(3)Clean paralleling receptacles with filtered compressed air and an electrician’s brush or wipe with aclean, lint-free cloth lightly moistened with an approved solvent.Visually inspect paralleling receptacles for cracks, corrosion, stripped or otherwise damagedthreads and evidence of shorting or other damage.Visually inspect covers and shorting plug for cracks, corrosion, broken chains, stripped or otherwisedamaged threads, and damaged or deteriorated gasket.Do not use acid core solder on electrical components. Equipment damagecould result if caution is not observed.NOTEUse figures FO-1 and FO-2 as a guide for proper connection.c.Installation.(1) Solder electrical leads to receptacles.(2) Attach paralleling receptacles to generator set and secure with screws (Figure 4-49).(3) Attach shorting plug to paralleling receptacle and install protective caps.(4) Install lockwashers and screws.4-77 TACTICAL RELAY ASSEMBLY. Visually inspect tactical relay assembly (Figure 1-4) for insecure mount-ing, cracks, dents, corrosion, bent or broken connector pins and evidence of shorting or other damage.4-78 PRECISE RELAY ASSEMBLY (50/60 Hz Precise Sets). Visually inspect precise relay assembly(Figure 1-4) for insecure mounting, cracks, dents, corrosion, bent or broken connector pins and evidence of short-ing or other damage.4-79 SPECIAL RELAY ASSEMBLY (50/60 Hz Precise and Utility Sets). Visually inspect special relay assembly(Figure 1-4) for insecure mounting, cracks, dents, corrosion, bent or broken connector pins, and evidence of shortingor other damage.4-80 SPECIAL RELAY ASEMBLY (400 Hz Precise Sets). Visually inspect special relay assembly (Figure 1-4)for insecure mounting, cracks, dents, corrosion, bent or broken connector pins, and evidence of shorting or other damage.4-81 PRECISE RELAY ASSEMBLY (400 Hz Precise Sets). Visually inspect 400 Hz relay assembly (Figure 1-4)for insecure mounting, cracks, dents, corrosion, bent or broken connector pins, and evidence of shorting or other damage.4-114
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
