5-56
TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
5-29. TEST AND REPAIR REMOTE CONTROL UNIT (cont)
NOTE
All switches are removed in the
same manner.
The BATTLESHORT
ON/OFF switch has one additional
part which will be identified in
the following steps.
(1) Tag and disconnect elec-
trical leads from switch
terminals.
(2) Remove nut (5), lockwasher
(6), locking ring (7),
switch guard (8) for
BATTLESHORT ON/OFF switch
only, switch (9) and nut
(10). Retain mounting
hardware.
c. Install ENGINE START/STOP, CON-
TACTOR CLOSE/OPEN and BATTLE-
SHORT ON/OFF switches.
NOTE
All switches are installed in the
same manner.
The BATTLESHORT ON/
OFF switch has one additional part
which will be identified in the
following steps.
(1) Obtain replacement switch
(9). Install nut (10) on
switch (9), switch guard
(8) BATTLESHORT ON/OFF
switch only, locking ring
(7) , lockwasher (6) and
nut (5).
(2) Reconnect tagged electri-
cal leads to switch ter-
minals.
d.
Replace FREQ ADJUST rheostats
as follows:
(1) Tag and disconnect wire
leads from R32 terminals.
(2) Remove knob (11) , nut and
washer assembly (12), and
rheostat (13) from panel.