TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF CONTROL CABLE, 100 FT.
4-48. TEST AND REPLACE CONTROL CABLE
This task covers: a. Removal
c. Installation
b. Test
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
5180-00-177-7033
Multimeter
6625-01-139-2512
Materials/Parts
Control Cable, 100 ft.
97403-13228E1946
REMOVAL
REMOVE 100 FT. CONTROL CABLE.
Equipment Conditions:
Reference
Para. 4-9 General Instructions.
Disconnect control cable con-
nectors from the junction box
and remove the remote control
unit.
Refer to Figures 2-3 and
2-5.
TEST
TEST 100 FT. CONTROL CABLE.
a.
b.
Use a multimeter and test for
pin-to-pin continuity (O ohms).
Test for open circuit (infinite
ohms) between each pin and pin-
to-connector at both ends of
the cable.
If an open or short occurs
within the cable assembly,
replace the cable.
4-74
