TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF CABLE ASSEMBLY POWER 25 FT.
4-49. TEST AND REPLACE POWER CABLE, 25 FT.
This task covers: a. Removal
c. Installation
b. Test
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
5180-00-177-7033
Multimeter
6625-01-139-2512
Materials/Parts
Cable Assembly, Power, 25 ft.
97403-13228E1944-2
Equipment Conditions:
Reference
Para. 4-9 General Instructions.
REMOVAL
REMOVE 25 FT. POWER CABLE.
Disconnect power cable connec-
tors from the junction box on
the first power unit and from
the connector plate on the
second power unit. Refer to
Figures 2-3 and 2-5.
TEST
TEST 25 FT. POWER CABLE.
a.
b.
4-76
Use a multimeter and test for
pin-to-pin continuity (O ohms).
Test for open circuit (infinite
ohms) between each pin and pin-
to-connector at both ends of
the cable.
If an open or short occurs
within the cable assembly,
replace the cable.
