• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5-4. Accessory Box Repair.
Figure 5-7. Lifting Generator Set.

Power Plant An/Mjq-18 (Nsn 6115-00-033-1398) (2) Mep-003A 10Kw 60Hz Generator Sets M103A3 2-Wheel, 1-1/2 Ton Modified Trailer Page Navigation
  62    63    64    65    66  67  68    69    70    71    72  
img
. . . .
ARMY TM 5-6115-633-14&P
Section Ill. GENERATOR SET
5-7. Generator Set Replacement. (See figures 5-6 and 5-7.) Power Plant AN/MJQ-18 has two
generator sets. Replacement procedures are identical for both.
a. Removal.
(1) Remove fitted cover (paragraph 3-11, a.(1)).
(2) Remove six bow assemblies (paragraph 3-11, b.(1)).
(3) Disconnect all power cables and ground wires (1, figure 5-6) from generator set (2).
NOTE
The beveled washers (6) may have been welded in place.
(4) Remove four screws (3), four Iockwashers (4), four flat washers (5) and four beveled
washers (6), securing generator set (2), to mounting rails (7) on trailer bed (8).
(5) Remove engine oil drain hose (9) from grommet in trailer bed (8).
(6) Disconnect external fuel line (10) if connected.
Figure 5-6. Detaching Generator Set from Trailer.
5-9


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.