TM5-6115-593-34
NAVFAC P-8-631-34
TO-35C2-3-463-2
LEGEND
1.
Socket
5.
Pin
9.
Valve
13.
Rod
2.
Lock wire
6.
Guide
10.
Pin
14.
Rod
3.
Ring
7.
Injector
11.
Guide
15.
Socket
4.
Roller
8.
Retainer
12.
Roller
16.
Lockwire
Figure 13-40. Pushrods and Tappets, Code B
(10) Tighten capscrews to 25 to 40 foot-pounds
(34 to 54 joules) in sequence shown in
figure 13-42.
(11) Continue tightening in sequence to 150 to
200 foot-pounds (203 to 270 joules) and to
275 to 305 foot-pounds (373 to 414 joules)
torque. Breakaway torque in direction of
tightening is 275 to 340 foot-pounds (373
to 461 joules).
(12) Place a straight edge on top of, and
parallel to, the cylinder head exhaust ports
to check port flatness across all six points
with feeler gauge. Variance up to 0.016
inch (0.41 mm) is acceptable.
NOTE
Replace water manifold seals when
replacing water manifolds.
(13) Reinstall the injectors, cylinder head cover,
water manifold, exhaust manifold, and
turbocharger
in
accordance
with
the
Operator/Crew
and
Organizational
Maintenance manual.
13-78
