TM 5-6115-593-12
TO 35C2-3-463-1
TABLE 3-3. OPERATOR/CREW TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
ENGINE CRANKS BUT WILL NOT START - Continued
Step 4.
Check LOW FUEL LEVEL indicator lamp on Generator
Control Panel.
If lit, temporarily set BATTLE SHORT switch to ON. If
engine starts set MASTER SWITCH to STOP and check fuel
oil levels in auxiliary tanks. Set FUEL PUMP switch to AUTO
if not already in this position. If LOW FUEL LEVEL indicator
lamp is not lit refer malfunction to next higher level of
maintenance.
3.
ENGINE SHUTS DOWN SOON AFTER STARTING.
Check engine fault indicators.
Check for low fuel oil level in day tank.
Add fuel oil as required.
4.
ENGINE SHUTS DOWN AND WILL NOT RESTART.
Step 1.
Check ENG FAULT indicator lamps on Generator
Control Panel.
If any one of them is lit refer to appropriate
subsequent step.
Step 2.
If HI COOL TEMP indicator lamp is lit, check coolant
level at radiator sight glass.
If low add coolant (as required by weather
conditions).
WARNING
Remove radiator cap slowly to permit pressure to escape prior to removal of cap.
If coolant level normal, refer to next higher level of maintenance.
Step 3.
If HI LUB TEMP indicator lamp is lit, check lube oil level using oil
level sight gauge.
Add lube oil as required.
Step 4.
If LOW OIL PRESS indicator lamp is lit, check lube oil level using oil
level sight gauge.
Add lube oil as required.
3-7
