TM 5-6115-584-12
NAVFAC P-8-622-12
TO-35C2-3-456-1
TM-05682C-12
(2)
(3)
(4)
(5)
(6)
Ensure vent on underside of fuel filler cap is open.
Open air intake access door on Acoustic Sup-
pression Kit (ASK) (4, figure 1-2.1).
Prime fuel lines by slightly opening plug (1, figure 4-9)
on head (8, figure 4-9). Do this on Filter Assembly
nearest check valve (6, figure 4-11).
Move master switch to PRIME& RUN.
When pump slows down and no further air bubbles
appear around plug, tighten plug (1, fig. 4-9).
NOTE
Preheat is not required when engine is warm.
b. Move master switch to PREHEAT position and hold for
one minute.
2-2
Change 7
