SIDE CLOSURE ASSEMBLY

Figure 5-9. Front Panel Assembly, Removal and Installation

Figure 5-10. Side Closure Assembly, Removal and Installation

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
139

TM 5-6115-584-12 NAVFAC P-8-622-12 TO 35C2-3-456-1 TM-05682C-12 5-12. SIDE CLOSURE ASSEMBLY. a. Removal. See figure 5-10. Remove side closure assembly from rear closure assembly, top and left panel assemblies as follows: (1) Remove top panel assembly (1) as described in paragraph 5-4. (2) Remove three screws (2) and locknuts (3) and six washers (4 and 5) securing side closure assembly (6) to left panel assembly (7). (3) Remove two screws (8) and locknuts (9), and four washers (10 and 11) securing side closure assembly (6) to rear closure assembly (12) and remove side closure assembly (6). b. Installation. See figure 5-10. Install side closure assembly to rear closure assembly, top & left panel assemblies as follows: (1) Position side closure assembly (6) against rear closure assembly (12). (2) Install side closure assembly (6) to rear closure assembly (12) using two screws (8) and locknuts (9), and four washers (10 and 11). (3) Torque screws (8) to 16 ±2 ft-lbs dry. (4) Install three screws (2) and locknuts (3) and six washers (4 and 5). (5) Torque screws (2) to 16 ±2 ft-lbs dry. (6) Install top panel assembly (1) as described in paragraph 5-4. 5-13. REAR CLOSURE ASSEMBLY. a. Removal. See figure 5-11. Remove rear closure assembly from control box support, side closure assembly and right and top panel assemblies as follows: (1) Remove top panel assembly (1) as described in paragraph 5-4. (2) Remove two screws (2) and locknuts (3), and four washers (4 and 5) securing rear closure assembly (6) to right panel assembly (7). (3) Remove two screws (8) and locknuts (9), and four washers (10 and 11) securing side closure assembly (12) to rear closure assembly (6). Change 7 5-21

Privacy Statement
Press Release
Contact