Battery Frame Bottom and Tray

CHAPTER 5 MATERIEL USED IN CONJUNCTION WITH DOD STANDARD GENERATOR SET, 5KW DIESEL ENGINE DRIVEN, MODEL MEP-002A

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
118

(b) Refer to paragraph 4-38 and install con- trol cubicle. (2) Battery Frame Bottom and Tray. (a) Position battery tray (12) and bottomframe (11) on skid-base (24). Attach by installing nuts (5 and 9), lockwashers (6 and 10), bevel washers (7) and screws (4 and 8). NOTE Bevel. washers are only on the four bolts at the outside of the skid-base. TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12 (b) See paragraph 4-25 and install batteries and battery hold-downs. (3) Slave Receptacle. Install bracket (23) with screws (22). Install slave receptacle (21) on bracket with screws (18), lockwashers (20) and nuts (19). Install leads (17) on slave receptacle as tagged. Re- move tags. (4) Ground Stud. Install ground stud (16) on skid-base (24) with Iockwasher (14) and nut (13). Install leads (15 and 17) on ground stud (16) with Iockwasher (14) and nut (13). On ASK equipped generators, install entire ASK (refer to chapter 5). Change 7 4-59/ (4-60 blank)

Privacy Statement
Press Release
Contact