ACOUSTIC SUPPRESSION KIT
ACOUSTIC SUPPRESSION KIT.
The acoustic suppression kit (ASK) is an add-on enclosure that
reduces the noise level from the DOD Standard Generator Set, 5KW
Diesel Engine Driven, Model MEP-002A.
The control cubicle and ac
output control box assembly are not covered and the fuel tank is
only partially covered.
Other controls or areas requiring fre-
quent service can be reached through top, right and left panel
All ASK information plates are shown in figure
See figure 5-2.
Remove cover assembly
consisting of top panel, left and right panels, and front panel
assemblies as follows:
(1) Remove three screws (1) and washers (2) securing
left panel assembly (3) to left support assembly (4).
(2) Remove three screws (5) and locknuts (6), and six
washers (7 and 8) securing left panel assembly (3) to side
closure assembly (9).
(3) Remove five screws (10) and washers (11) securing
right panel assembly (12) to right support assembly (13).
(4) Remove two screws (14) and washers (15) securing
right panel assembly (12) to rear panel assembly (16) and remove
two screws (17) and locknuts (18), and four washers (19 and 20)
securing right panel assembly (12) to rear closure assembly (21).
Remove seven screws (22) and locknuts (23), and 14
washers (24 and 25) securing top panel assembly (26) to rear
closure (21) and side closure assembly (9).
The ASK Cover assembly is heavy.
Four (4) people are
required to lift cover.
Failure to follow safety
rules could result in personal injury.
(6) Lift and remove cover assembly from generator set.