Figure 4-11. Fuel Filters and Fuel Strainer Assembly

ELECTRIC FUEL P U M P S . F U E L A N D AUXILIARY SOLENOID VALVE

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
73

TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12 heat. Flash point of solvent is 100° F to 138°F (38°C to 59°C). Clean parts in a well-ventilated area. Avoid Every 300 operating hours, clean strainer element inhalation of solvent fumes and prolonged ex- (7) by soaking in dry cleaning solvent (Fed. Spec posure of skin to cleaning solvent. Wash ex- P-D-680) and dry thoroughly using a clean dry cloth. posed skin thoroughly. Dry cleaning solvent Replace strainer element (7) on stud (3) and secure (Fed. Spec P-D-680) used to clean parts is with retainer (6). Position gasket (9) and body (5) on potentially dangerous to personnel and prop- head (10) and secure with washer (2) and nut(1). erty. Do not use near open flame or excessive Close drain cock (4). Figure 4-11. Fuel Filters and Fuel Strainer Assembly 4-20

Privacy Statement
Press Release
Contact