CHAPTER 4
HOUSING GROUP REPAIR INSTRUCTIONS
4-1. General.
The engine generator set housing provides a pro-
tective enclosure during set operation or storage.
Doors permit sufficient access to all areas of the
engine generator set for operating and routine main-
tenance procedures.
4-2. Housing Removal and Cleaning.
Refer to Operator and Organizational Maintenance
Manual.
4-3. Housing Inspection, Servicing, and Repair.
a. Refer to Operator and Organizational Mainten-
ance Manual for inspection and servicing procedures.
b. Repair any minor
covers, and panels.
c. Sheet metal tears
sheet metal dents in doors,
can be repaired by welding.
d. Paint scratches that reveal bare metal or
paint that is removed during repair should be touched
up as follows:
(1) Smooth edges of remaining paint with fine
sandpaper.
(2) Clean area with Federal Specification P-
D-680 solvent and wipe dry with clean cloth.
(3) Treat area and paint in accordance with
service requirements.
e. Replace any cover, door, panel, or hardware
that is damaged beyond repair.
4-4. Housing Installation.
Refer to Operator and Organizational Maintenance
Manual.
4-1/(4-2 blank)