STEP 1.
STEP 2.
STEP 3.
PREPARE ENGINE GENERATOR SET FOR STARTING (FIG. 2-6).
START ENGINE GENERATOR SET (FIG. 2-7).
ROTATE AMPS-VOLTS SELECTOR SWITCH TO EACH PHASE POSITION WHILE OBSERVING AC
AMMETER. IF MORE THAN 100% RATED CURRENT IS INDICATED IN ANY PHASE POSITION, REDUCE
THE LOAD.
STEP 4. IF MORE THAN THE 100% PERCENT LOAD IS INDICATED ON THE KILOWATT METER, REDUCE
THE LOAD.
ME 6115-545-12/2-9
Figure 2-9. Single Generator Unit, Operating Instructions
2-24
