NORMAL
STEP 1. OPEN MAIN AC CONTACTOR BY MOMENTARILY PLACING CKT BRK SWITCH IN OPEN POSITION.
STEP 2. ALLOW 3 MINUTES TO ELAPSE AFTER PERFORMING STEP 1 AND PLACE START-RUN-STOP
SWITCH IN STOP POSITION.
STEP 3. AFTER ENGINE STOPS, REMOVE DC CONTROL POWER BY OPENING DC CONTROL CIRCUIT
BREAKER.
EMERGENCY
PULL DC CONTROL CIRCUIT BREAKER.
ME 6115-545-12/2-8 C3
Figure 2-8. Stopping Instructions
Change 3 2-23
