TM 5-6115-465-12
TO 35C2-3-446-1
NAVFAC P-8-625-12
TM 06858B/06859D-12
Section XXI. PARALLELING CABLE
(2) Check between pins of each terminal for
GENERAL.
short circuits.
The paralleling cable is a 25 foot, four conductor,
flexible, heat and oil resistant cable. It is used to
CAUTION
interconnect governor and voltage paralleling circuits
of generator sets operating in parallel (precise sets
Do not use acid core solder on
only).
electrical wiring.
MAINTENANCE OF PARALLELING CABLE.
c. Repair. Replace damaged wires or con-
a. Cleaning and Inspection.
nect ors as follows:
(1) Clean paralleling cable (figure 3-50) with
filtered compressed air and an electrician's brush or
(1) Loosen saddle clamp screws (figure 3-50).
wipe with a clean, lint-free cloth lightly moistened
with an approved solvent.
(2) Tag wires and unsolder connections.
(2) Visually inspect paralleling cable for chaf-
ing, deterioration, and other damage.
nections.
broken pins, stripped or damaged threads, cracks,
corrosion and other damage.
b.
Testing.
(4) Tighten saddle clamp screws.
(1) Test individual wires for continuity with an
ohmmeter or continuity light.
Repair of Paralleling Cable
3-97/(3-98 blank)
