T O 35C2-3-442-2
P-8-627-34
TM 5-6115-457-34
TM-07464A-35
Legend to figure 8-50:
24.
1.
Gauge assembly.
Lock washer (8)
Lock washer (5)
13.
25.
2.
Tube
Plate
Washer (5)
14.
26.
Fitting (3)
3.
Plate
Gasket
15.
27.
4.
Bolt (4)
Plug
Bolt (2)
16.
Lock washer (4)
28.
Plug
5.
Lock (2)
17.
29.
Gasket
Bolt (20)
6.
Clip (2)
18.
30.
7.
Bolt
Lock washer (20)
Tube
19.
31.
Pan
8.
Washer (20)
20.
Lock
32.
Bolt (3)
Seal
21.
Bolt (6)
9.
10.
33.
Tube assembly
Lock washer (3)
22.
Lock washer (6)
Plate assembly
34.
Bolt (8)
11.
23.
Washer (3)
12.
Bolt (5)
c. Inspect tube (19) for damage.
8-171. INSTALLATION.
Replace damaged tube.
a. Refer to figure 8-50 and install oil
d. Inspect fittings (3) for damage.
pan group as follows:
Replace damaged fittings.
1. Install new gasket (29), plate
e. Inspect components for dents, cracks,
assembly (34), lock washers (28), and bolts
distortion, and damaged threads.
(27).
f. Discard gaskets (15 and 29) and seal
2. Install plates (25 and 26), lock
(32).
washers (22 and 24), and bolts (21 and
23).
8-169. REPAIR.
a. Remove minor nicks and burrs using
3. Install new gasket (15) and pan
a suitable file or hone.
(20). Install washers (8, 11, and 14),
lock washers (7, 10, and 13), and bolts
b. Repair dents and distortion using
(6, 9, and 12).
proper tools.
b. Connect water lines at the rear of
c. Repair minor thread damage using
oil pan.
a suitable thread chaser.
8-170. REASSEMBLY.
c. Connect oil pan drain line.
Refer to figure 8-50 and reassem-
d. Remount fuel fired heater if so
ble oil pan group in the reverse order of
equipped.
index numbers assigned.
Change 8
8-105
