TM 5-6115376-13
c. Automatic Switch Disassembly. Refer to
a. General. The synchronizer assembly is
mounted on the roadside fender of the PU-407/M.
(1) Remove nuts (13), washer (12), screws
It is used to operate the PU-407/M and PU-408/
(1), and disassemble support shield (2), shield
M singly, alternately, or in parallel.
(3), spacer (43), and insulation (8).
b. Automatic Switch, Removal and Installation.
(2) Remove nut (41), washer (42) and (10),
Remove rear access panel; refer to figure 6-6 and
and bolt (11).
remove the automatic switches. Install replace-
(3) Unscrew bolt (11) and remove coil (9)
ment automatic switch in reverse order of re-
and washer (10).
moval.
