TM 9-6115-668-13
5.33 GLOWPLUG MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down,
(item 3, appendix B)
paragraph 2.5.2
W A R N I N G
Disconnect the negative battery cable first and then the positive bat-
tery terminal cable. Failure to observe this warning could result in se-
vere personal injury or death.
C A U T I O N
Tag all cables prior to removal to ensure correct connection of the
cables during installation.
REMOVAL
1.
Open flap (2, figure 5-44) on unit hood assembly (1).
N O T E
Retain insulator for re-use.
2.
Remove knurled nut (16), washer (15), and cable X108 (14), insulator (13), and cable X108 (12)
from threaded portion of flame glowplug (11).
3.
Remove flame glowplug (11) from heating unit (10).
INSTALLATION
1.
Install flame glowplug (11) on heating unit (10).
2.
Install cable X108 (12), insulator (13), cable X108 (14), washer (15), and nut on threaded portion of
flame glowplug (11). Tighten nut (16).
3. Close flap (2).
5-181
