TM 9-6115-662-13&P NOTES: 1. 2. 3. 4. 5. MARK REFERENCE DESIGNATION “J3” OR “PI.” IN ACCORDANCE WITH MIL-STD-130, METHOD OPTIONAL HOT  STAMP  “W17  OR  W18”,  INDICATED  IN  WIRE  LIST,  AND  “97403-13229E5806-  ”  WITH  APPROPRIATE  DASH NO. ON SLEEVING, FIND NO. 5, IN ACCORDANCE WITH MIL-M-60903. LOCATE APPROXIMATELY AT MIDPOINT OF WIRE. HOT STAMP SLEEVING, FIND NO. 5, WITH WIRE ADDRESS, WITHIN 2  INCHES OF ITS TERMINATIONS, IN ACCORDANCE WITH MILM060903. THE ADDRESS CONSISTS OF THE FROM TERMINATION, A DOUBLE HEADED ARROW, AND THE TO TERMINATION. SOLDER  CONNECTIONS  SHALL  BE  IN  ACCORDANCE  WITH  MIL-STD-2000, USING SOLDER, FIND NO. 6. CRIMPED  CONNECTIONS  SHALL  BE  IN  ACCORDANCE  WITH  MIL-E-45782. WIRE LIST TERMINATION TERMINATION LENGTH HARNESS DASH NO. WIRE NO. FROM FIND  NO. TO FIND  NO. +/- .12 REF DES 1 J3-A 1 K2-12 3 12.00 -1 2 J3-B 1 K2-Y 3 12.00 W17 3 J3-E 1 GND 4 21.00 1 P1-A 7 K1-12 3 36.00 -2 2 P1-B 7 K1-Y 3 36.00 W18 3 P1-E 7 GND 4 45.00 Figure G-3. Switch Box Power Wing Harness  W17 and W18 (Sheet 2). G-7