TM 9-6115-662-13&P FIND NO. PART NO. 1      M5086/2-1-9 2 M23053/5-1094 3 MS25036-130 4 MS25036-131 5 MS25036-129 6 Sn60Pb40 NOTES: 1. 2. 3. 4. QUANTITY  REQUIRED -6 THRU -6 1 3 1 AR PARTS LIST -9 -10 DESCRIPTION SPECIFICATION 1 1 WIRE, ELECTRICAL, 1 AWG, WHT MIL-W-5086/2 3 3 INSULATION SLEEVING, HEAT MIL-I-23053/5 SHRINKABLE TERMINAL LUG, CRIMP, 1 AWG, .375 STUD SIZE 1 TERMINAL LUG, CRIMP, 1 AWG, .500 STUD SIZE 1 TERMINAL LUG, CRIMP, 1 AWG, .250 STUD SIZE AR AR SOLDER QQ-S-571 CRIMPED CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-STD-454, REQUIREMENT 19. HOT STAMP “W ”, INDICATED IN WIRE LIST, AND “97403-13229E5811- ” WITH APPROPRIATE DASH NO. ON SLEEVING, FIND NO. 2, IN ACCORDANCE WITH MIL-M-60903. LOCATE AT MIDPOINT OF WIRE, HOT STAMP INSULATION SLEEVING, FIND NO. 2, WITH WIRE ADDRESS, WITHIN 2 INCHES OF ITS TERMINATIONS, IN ACCORDANCE WITH MIL-M-60903. THE ADDRESS CONSISTS OF THE FROM TERMINATION, A DOUBLE HEADED ARROW, AND THE TO TERMINATION. STRIP WIRE IN ACCORDANCE WITH WIRE LIST AND TIN EXPOSED CONDUCTOR FOR A DISTANCE OF .12 +/- .03 INCHES FROM CONDUCTOR END IN ACCORDANCE WITH MIL-STD-2000. Figure G-6. Power leads W1-W5 (Shed 1 of 2). G-11