TM 9-6115-662-13&P
NOTES:
1.
2.
3.
4.
5.
6.
CRIMP CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-E-45782.
AT PIGTAIL END OF CABLE, THE FOUR 8 AWG GROUNDING CONDUCTORS SHALL BE TWISTED TOGETHER,
STARTING AT THE JACKET. CONDUCTORS SHALL BE SOLDER COATED FOR A LENGTH OF .250 FROM END
USING SOLDER, FIND NO. 5
AT PIGTAIL END OF CABLE, EACH INSULATED CONDUCTOR SHALL HAVE THEIR INDIVIDUAL STRANDS
TWISTED TOGETHER AND SOLDER COATED FOR A LENGTH OF .125 FROM END USING SOLDER, FIND NO. 5
INSULATION COLORS, IN ACCORDANCE WITH WIRE TABLE, SHALL BE INCLUDED AS PART OF THE
ORDERING DATA.
HOT STAMP “97403-13229E5674-” AND “W19” IN .23-.39 HIGH WHITE CHARACTERS ON INSULATION
SLEEVING, FIND NO. 3, IN ACCORDANCE WITH MIL-M-60903.
HOT STAMP TERMINAL DESIGNATION, AS SHOWN IN WIRE TABLE, USING .09-.16 HIGH BLACK
CHARACTERS, IN TWO PLACES (180° APART) ON INSULATION SLEEVING, FIND NO. 4, IN ACCORDANCE
WITH MIL-M-60903.
WIRE LIST
Figure G-1. B Unit Cable Assembly W19 (Sheet 2).
G-3
