TM 9-6115-660-13&P
b.
Remove self-tapping screws (2) and reflector (1) from front of trailer (AN/MJQ-37 and AN/MJQ-38 only).
c.
Install reflector, (7) screws (8), flat washers (6), and self-locking nuts (5) on trailer.
d.
Install reflector (1) and self-tapping screws (2) on front of trailer (AN/MJQ-37 and AN/MJQ-38 only).
4-23 AN/MJQ-37, ANIMJQ-38, PU-798, AND PU-799 TRAILER PLATFORM MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic’s
Reference
(item 1, appendix)
Trailer handbrakes set, front support
Materials/Parts
leg/landing leg lowered, and rear
leveling-support jack lowered; paragraph
Nuts, Self-locking
2-3.2.1.
Both generator sets shut down; paragraph
2-5.3.3.
Accessory box removed; paragraph 4-19
(AN/MJQ-37 and AN/MJQ-38 only).
Figure 4-23. Power Plant/Power Unit Trailer Platform Replacement.
Change 2 4-45
