TM 9-6115-604-34 NAVFAC P-8-633-34 Table 1-5.  System Capacities and Detailed Data on Components (Continued) CONTROLS, INSTRUMENTS, AND SWITCHGEAR (CONTINUED) Power Factor Transducer Drawing Number: Output, Linear to Phase Angle: Output Load Required: Power System: Power Factor Range: Phase Angle Range: Accuracy Rating: At 77F (25C): At -13to 140F(-25 to+60C): Operating Temperature: Storage Temperature: Humidity Conditions: Manufacturer: Part Number: FSCM: Frequency Transducer Drawing Number: Linearity: Voltage Range (120 V): Voltage Influence (120 V): Insulation Ground: Loss: Operating Temperature: Storage Temperature: Humidity Conditions: Manufacturer: Part Number: FSCM: Current Transducer Drawing Number: Full Scale Current: Burden: Overload: 80-7382 0 to 0.5 mA 0 to 10 K ohms 3 phase, 4 wire 0.5 lag to 0.5 lead 0 to 60 degrees 0.01 pf from 0.8 pf to 0.8 pf ±0.02 pf from 0.8 pf to 0.8 pf 0.025 pf from 0.5 pf to 0.5 pf ±0.4 pf from 0.5 pf to 0.5 pf -25°  to +125F (-31 to 51C) -65 to +155F (-53 to 68C) To 100% Scientific Columbus PF-34A4 24561 80-7360 2% of span Hz Range Load Resistance DC Output 45 to 55 3000 ohms 1.5 0 1.5 48 to 52 1200 ohms 0.6 0 0.6 55 to 64 3000 ohms 1.5 0 1.5 58 to 62 1200 ohms 0.6 0 0.6 59 to 61 600 ohms 0.3 0 0.3 Zener regulated; 100 to 140 V ac ±2% of span 2600 V 3.6 V a -25 to +125F (-31°  to 51C) -65 to +155F (-53 to 68C) To 100% Westinghouse Corporation VC-841 88416 80-7383 5 amperes 0.25Va 10 amperes continuous, 250 A for 1 second 1-33