REPLACE CONNECTOR PLATE

TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual
Page Navigation
57

TM5-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 MAINTENANCE OF CONNECTOR PLATE 4-17. REPLACE CONNECTOR PLATE This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions: Reference Para. 4-9 General Instructions. Tools General Mechanic’s Tool Kit 5180-00-177-7033 Materials/Parts Connector Plate 97403-13228E1902 NOTE Replacement of the connector plate requires removal of the mounted cable heads and generator ground. Proceed is follows: REMOVAL 1. 2. OPEN LEFT REAR ACCESS DOOR. Open door access, left rear on generator set, to allow easy access to rear of connector plate. REMOVE GROUND CABLE. a. Remove brass nut (1), self- locking. b. Tag and remove ground wires (3) and three flat washers (2). 4-21

Privacy Statement
Press Release
Contact