TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
4-11.
REPLACE BATTERY CABLES (cont)
FABRICATION
REPLACE BATTERY CABLE.
Replacement of the battery
cables is by fabrication (see
Appendix G).
INSTALLATION
INSTALL BATTERY CABLE.
NOTE
The negative cable
lead is marked with
black shrink tubing
and the positive
cable lead is marked
with red shrink
tubing.
a.
Get a new set of battery cables
and route cables through the
skid base assembly, with con-
nector ends for batteries out-
wards, and secure the connector
strain reliefs to the skid base.
b.
Secure the negative cable lead
(see note), to the starter
mounting plate with screw (7),
and lockwasher (8). Secure the
positive cable lead to the
starter solenoid with lock-
washer (6) and nut (5).
c.
Route the cables through the
bushing on the battery box.
Secure the positive lead to
the positive battery terminal
connector with lockwasher (4)
and nut (3).
Secure the nega-
tive lead to the negative
battery terminal connector
with lockwasher (2) and nut
(1). Inspect all connections
to ensure the connections are
tight.
4-11
