TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF INTAKE BAFFLE ASSEMBLY
4-14. REPLACE INTAKE BAFFLE ASSEMBLY
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
5180-00-177-7033
Materials/Parts
Baffle Assembly, Intake
97403-13228E1877
Equipment Conditions:
Reference
Para. 4-9 General Instructions.
General Safety Instructions
The baffle assembly is too bulky and
heavy for one person to remove without
possible damage.
Get help to lift or
carry assembly.
Failure to do so may
result in serious injury.
REMOVAL
REMOVAL BAFFLE ASSEMBLY, INTAKE.
a.
Remove two bottom screws (1),
and flatwasher (2).
b.
Remove two top screws (1)
and flatwashers (2).
NOTE
When removing the right and left
side screws, one person should hold
the intake baffle assembly front to
keep the baffle asembly weight off
of the screws being removed.
c.
Remove four screws (1), flat-
washers (2), left and right
side.
d.
Remove intake baffle assembly
(3) and attached gasket (4).
4-15
