TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
4-10.
REPLACE BATTERY (cont)
c.
Remove cable assembly (8)
from the batteries.
d.
Lift out batteries (9) one at
a time.
INSPECTION
INSPECT BATTERIES.
Refer to TM9-6140-200-14 for
inspection and servicing of
batteries.
INSTALLATION
1.
REPLACE BATTERIES.
a.
Individually place batteries
(9) into battery box (6).
b.
Connect cable assembly (8) to
battery terminals as shown.
c.
Connect positive battery
cable clamp (7) to positive
terminal.
d.
Connect negative battery
cable clamp (5) to negative
terminal.
2.
REPLACE BATTERY RETAINER.
a.
Thread three rods (3) into
bottom brackets.
b.
Place battery retainer (4)
over the three rods (3).
c.
Install three washers (2) and
nuts (1).
4-9
