TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
Subject Index
CHAPTER 5
INTERMEDIATE DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
CHAPTER INDEX
Page
Repair Parts, Special Tools, Test, Measurement
and Diagnostic Equipment (TMDE) and Support Equipment
5-1
Preventive Maintenance Checks and Services
5-1
Troubleshooting
5-1
Maintenance Procedures
5-6
Preparation for Storage and Shipment
5-61
Section I.
REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT AND DIAGNOSTIC
EQUIPMENT (TMDE) AND SUPPORT EQUIPMENT
5-1.
General
This chapter provides instructions for
intermediate direct support maintenance
on the PU 794/G as authorized by the
Maintenance Allocation Chart (MAC),
Appendix B.
Refer to TM5-6115-464-34
for maintenance tasks performed on the
Generator Set.
TM9-2330-205-14&P for generator set and
trailer TMDE.
5-3.
Repair Parts
Repair parts are listed and illustrated
in the Repair Parts and Special Tools
List (RPSTL), Appendix F. See TM5-6115-
464-24P and TM9-2330-205-14&P for genera-
tor set and trailer repair parts.
5-2.
Special Tools and Equipment
5-4.
Fabricated Tools and Equipment
Test, measurement and diagnostic equip-
ment (TMDE) and support equipment includ-
ing electrical test equipment and standard
gages are listed in Appendix B, Section
III.
Refer to TM5-6115-464-24P and
No fabricated tools and equipment are
required for intermediate direct support
maintenance on the PU 794/G.
Section II.
PREVENTIVE MAINTENANCE CHECKS AND SERVICES
5-5.
General
Preventive maintenance checks and ser-
vices are performed by unit maintenance
personnel.
Refer to Chapter 4 for
instructions.
5-6.
General
Section III.
TROUBLESHOOTING
5-7.
Troubleshooting
This section contains troubleshooting
Table 5-1 lists the common malfunctions
and corrective actions performed at the
of the PU 794/G that must be corrected
intermediate direct support maintenance
at the intermediate direct support main-
level as authorized by the MAC, Appendix B.
tenance level.
Refer to TM5-6115-464-34
5-1
