TM5-6115-593-34
NAVFAC P-8-631-34
TO-35C2-3-463-2
LEGEND FOR FIGURE 13-9
1.
Brush inspection plug
26.
Dust cap
49.
Starter housing
2.
Inspection plug gasket
27.
Oil wick
mounting plate
3.
Lever housing
28.
Drive housing bushing
50.
Insulator washer
4.
Bolt
29.
Drive assembly
51.
Preformed packing
5.
Solenoid
30.
Brake washer
52.
Brush plate insulator
6.
Starter housing
31.
Protective dust cap
53.
Sleeve bearing
7.
Plunger
32.
Oil wick
54.
Flat washer
8.
Protector bellows
33.
Lever housing plug
55.
Machine screw
9.
Terminal lead
34.
Machine bolt
56.
Brush plate screw
10.
Plunger rod nut
35.
Lever housing bushing
57.
Electrical brush
11.
Shift lever
36.
Armature
58.
Helical spring
12.
Plunger spring
37.
Spacer washer
59.
Terminal stud
13.
Snap ring
38.
Preformed packing
60.
Terminal lug
14.
Recessed washer
39.
Oil seal
61.
Flat washer
15.
Recessed washer
40.
Plain external nut
62.
Field terminal washer
16.
Spring retainer washer
41.
Plain hexagon nut
63.
Field coil insulator
17.
Snap ring
42.
Lockwasher
64.
Field coil
18.
Shift lever shaft
43.
Flat washer
65.
Terminal stud bushing
19.
Preformed packing
44.
Electrical holder
66.
Pole shoe screw
20.
Preformed packing
assembly
67.
Pole rotor shoe
21.
Stator housing
45.
Braided strap
68.
Field coil screw
22.
Bolt
46.
Electrical parts kit
69.
Insulator plate
23.
Bolt
47.
Insulator washer
70.
Protective dust cap
24.
Gasket
48.
Machine bolt
71.
Pilot relay
25.
Rubber ball
72.
Bracket
(2) Disconnect terminal lead (9) from solenoid.
(3) Remove four bolts (4) securing solenoid (5) to
starter housing (6). Slide solenoid off plunger
(7) and free of bellows (8).
(4) Remove cap (1) from lever housing (3).
(5) Remove nut (10) securing plunger.(7) to shift
lever (11) from inside of lever housing (3).
(6) Compress
spring
(12)
and
remove
snap
rincg:(13) from plunger (7). Remove washer
(14), spring (12) and-washer (15), bellows (8)
and washer (16). Discard snap ring.
(7) Remove snap ring (17) from shift lever shaft
(18). Remove shaft and shift lever (11) from
lever housing (3) Discard packings (19) and
(20).
(8) Matchmark stator housing (21) to lever housing
(3) and lever housing (3) to starter housing (6).
(9) Remove six bolts (23) securing stator housing
(21) to lever housing (3).Separate housings and
remove gasket (24).Discard gasket and remove
six rubber balls (25).
(10)
Remove dust cap (26) and oil wick (27)
from stator housing (21). Discard oil wick.
(11)
Remove bushing (28), drive assembly (29)
and brake washer (30) from lever housing (3).
(12)
Remove dust cap (31), oil wick (32) and
plug (33) from lever housing (3).Discard oil
wick.
(13)
Remove seven bolts (34) securing lever
housing (3) to starter housing (6).
(14)
Remove bushing (35) from lever housing (3)
and slide lever housing off armature (36) and
away from starter housing (6).
(15)
Remove washer (37), packing
13-14
