TM 5-6115-593-12
TO 35C2-3-463-1
STEP 1.
CONNECT REMOVE CONTROL MODULE AND CABLE (PARA. 2-10A).
STEP 2.
PREPARE GENERATOR SET/REMOTE CONTROL MODULE FOR STARTING (FIGURE 2-15).
STEP 3.
START GENERATOR (FIGURE 2-16).
STEP 4.
ROTATE AMMETER SWITCH TO EACH PHASE POSITION WHILE OBSERVING AMMETER. IF MORE
THAN 100 PERCENT RATED CURRENT IS INDICATED IN ANY PHASE POSITION, REDUCE THE LOAD.
STEP 5.
IF MORE THAN 100 PERCENT LOAD IS INDICATED ON THE KW METER, REDUCE THE LOAD.
Figure 2-18. Operating Instructions, Single Generator Unit Using
Remote Control Module
2-37
