j.
sink
TM5-6115-585-34
NAVFAC P-8-623-34
TO-35C2-3-455-2
TM-05684C/05685B-34
Reassembly.
(2A) For MEP-112A, assemble shaft collar (34),
(1) Install diodes (42and43, figure 8-l) on heat
bearing retainer (33A), washers (32B), bearing (32A),
to the generator shaft using screw (29A), lockwasher
and secure with lockwashers (41) and nuts (40).
(30A) and flatwasher (31A).
(2) For MEP-003, assemble shaft collar (34),
bearing retainer (33), bearing (32) to the generator
(3) Place rotor assembly into stator (53).
shaft using screw (29), lockwasher (30) and flat-
(4) Position fan (28) in housing (53).
washer (31).
Figure 8-2. Testing Exciter Rotor
Change 2
8-5